The PiBox is almost completed. It’s taken far too long due to all sorts of silly things like having to get fans because a dry run indicated the poor little boards were getting a bit hot, having to get bolts for the fans because I had none long enough, and having to get a connector for the 1-wire (actually 3 wires!) lead from the central heating sensors.
So, there is is. Two fans on the left, 5V PSU bottom right, gigabit Ethernet switch above that, then the Pi’s: top is the PiStar with the DVMega board which has coax to the rear panel and then a dummy load, middle is the ASD-B and central heating monitor Pi, and the bottom is a general purpose one with various bits on such as rtl_tcp. The lower two boards have USB-A sockets on the rear of the case for the two SDR sticks, one for the ADS-B antenna and one to attach to a Discone for general use.
But there is an issue. I had originally intended this to sit in the shack but those fans are just too annoying. Not loud, but constant. I suspect the box will end up in the loft. Or maybe a re-think. I may fiddle with running the fans from one (or two) of the Pi’s and set up some temperature control to turn them on and off. It may even be that I am rather too ‘sensitive’ to the temperature range as others seem happy running their boards a lot hotter than I do mine.