More QO100 work
I finally mounted the dish. It's been cluttering up the workshop for months now. My original plan was to mount it on a pole by the workshop which would have needed a concrete base and regular trimming of the apple tree and hedge. So, it's mounted on the garage wall with a TK bracket.
Aligning it wasn't too bad except I managed first to find the Astra satellite at 19.2 degrees thinking it was the one at 28.2. After I found the second one it was not too difficult to find a satellite carrying Qatar TV using the GTMedia V8. With bolts tightened a bit and after rigging all the gubbins up I found the beacon via an SDRPlay SDR and SDRUno but the levels were well down. The Pluto and SDR Console did a far better job so there will be some setting I overlooked. I copied a couple of QSOs but working outside on a Sunday with the whole estate doing gardening made it rather hard, even with headphones! Anyway, the Pluto is the one that will be used so good to see the whole RX chain working. I have some decent WF100 cable for the LNB feed but will need to make something up for the GPSDO feed.
Next step is to mount the Pluto, bias tee and PSUs inside the garage and use Ethernet back to the shack. There is a convenient air brick next to the ironmongery.
The POTY is back inside for now and I'll need to make a rain cover too, but it feels like progress finally.