Windows 11 (3)

M0RVB

IT woes

After sorting out the issues regarding the eMudrha digital cetificate mess where some of my kit needed updating by hand, plus sorting out PHP upgrades on a couple of internal systems I turned my attention to the impending MacOS upgrade from 26.x to 27.x. For a while now the Mac has been warning that some applications will no longer be supported. It looks like from MacOS 28.x onwards there will be no further support for Intel chips. Now, I have a Mac Mini with an Apple M2 chip so why does that bother me? It's because some applications were written for Intel and were using Apple's Rosetta glue-ware to translate their code and Rosetta will stop when MacOS 28 comes ( https://support.apple.com/en-us/102527 ) The only (as far as I know anyway!) issue I will have is that I use Barrier to allow the Mac to act as keyboard and mouse to other systems. Specifically I have a Windows 11 PC, the Mac and a Linux PC with the Mac in the middle. This gives me three screens, one each controlling the TS2000X and the FT450D, with the Mac being my main workhorse plus it has the two AirSPY SDRs attached. Audio inputs and outputs from each go via a mixer and a splitter making it an any-to-any setup. Barrier has not been updated for some years and is written for Intel architecture. So that stops when MacOS 28 hits. Anyway... there is a more modern software called deskflow ( https://github.com/deskflow/deskflow ) which is effectively a Barrier replacement and is being maintained. The software installed fine on the Mac and the Windows PC - Barrier had to be stopped first and so I needed to find a keyboard and mouse for the Windows box in order to set things up. On to the Linux box... no software release for the 24.04 version installed there. Hmmm. Oh well I did plan to upgrade to 26.04 anyway so may as well do that first. I've used do-release-upgrade before and all seemed ok, all until reboot. error: symbol 'grub_memcpy' not found Oh, joy. I vaguelly remember this happening before but I have no notes. At this stage it is worth mentioning that I think the global dash to get everything into AI is badly thought out and that peope may lose the ability to think and reason for themselves. Having spent my working life in higher education I've see the effect on students in the early days of IT. But I used duck.ai which was incredibly helpful in advising me things to try and do and whereas none of it was confusing with my IT background it helped enormously... Advice in hand, all sugestions exhausted I generated a Lubunto 26.04 DVD, booted the PC into 'Try it' mode and used this, plus instructions from duck.ai to replace Grub and fix the issue. After that hiatus the deskflow software went in fine and all is well... and documented!! Now all I need to do is…

Continue reading...
M0RVB

The wonderful world of (Windows) printing...

Why, oh why in 2026 is it still a faff to get Windows to print? We have a laptop and one of my dekstop systems on Windows 11. We needed to print from the laptop today and everything came out zoomed in so much that only the middle 50% or so of each page was on the page. We have a Xerox Phaser 6510 colour laser printer which is connected to the house Ethernet LAN. Now I do have to add that, much as I believe the 'AI' revolution will be the downfall of our ability to think for ourselves it does speed things up when asked simple questions that you can accept the answers to... so, off to Duck.AI for advice! After wrangling numerous settings I reinstalled the printer and fired off a test page. Same problem. The next suggestion was remove the printer and then remove the associated driver (AI failed a tad here because removing the printer meant I could not see what driver it used - so I had to reinstall it first). It had selected a generic IPP driver. The next suggestion was to chose a Xerox driver but there was none. The PC knows the printer by name, has the Xerox app which it downloaded itself, but no specific driver. Ok, off to Xerox... and driver installed. After selecting said driver the test page now prints, as does the document we wanted an hour ago. So let's try my desktop that has never had the printer attached. Same thing, Xerox app loaded, and it told me to use the generic IPP driver which I rather stupidly accepted. Test page - same issue. Right. Wrangle the Xerox driver in, select Type 3 printing which it recommended (whatever...) and the test page is now fine. At least that only took 15 minutes. I know it prints fine from the Mac and I never did any wrangling on there. It prints from the iPhone and always had. So, let's try my Linux desktop which also has never had a printer attached. Find a file, choose print, it found the printer already - and it prints just fine. And that is how it has always been in my experience... anything other that Windows just gets on with things and prints regardless of whether or not that system had ever even seen the printer. Windows has always been daft. WHY? It's a pity that the kit I networked back in the 1990s is no more. There was a Xerox printer that was about 50 foot long, printed in CMYK using actual thick ink poured in from buckets, and printed from an array of Macs. I bet a Linux box would print fine to that. I dread to think what Windows would make of it.

Continue reading...
M0RVB

Windows 11

I knew this would happen. I ditched Windows some time ago because none of my kit would run Windows 11. So why, then, do I suddenly have TWO Windows 11 systems?? Ok... the first is because I really needed a laptop for travel. I have an iPad which is my daily travel thing but wanted Windows compatibility plus a keyboard. So I acquired a ThinkBook. it has yet to be out in the wild in anger but has the usual array of software including wsjt-x and it set up for the QMX+. So why two? I also need actual Excel compatibility plus I really miss SDR Console. I tried the latter under Wine but never completely successfully. eBay to the rescue and along came a neat HP system with an 8th gen i7 and Windows 11 Pro. MS Office (for Excel) came along via Groupon of all places for GBP 11. The original Windows 10 PC hosting the TS2000X which later became a Linux box is now the server, replacing the diminutive Lenovo PC. Having this in the shack running 24/7 has the advantage that I can retire some of the various Pi systems plus the Radio4 fanless PC that was hosting the ADSB grabber. That in turn is destined to replace pi-hole and the home automation stuff that is currently running on two Pi systems elsewhere.

Continue reading...