Portsdown progress
It really is taking me far too long to get this sorted out. But, finally some progress has been made... at least I now have a decent case and the screen mounted. So far, there is very little else in the case other than the Lime and Pluto, the screen, the Pi and a 12V to 5V converter. But at least there's plenty of space to add all the other necessary bits and pieces.
The screen was the most awkward thing to mount as it is designed to fit easily into a plastic surround with the Pi directly behind. For that, the 4 mounting screws fit directly to the case. But here I want it in the front panel. My rather less than elegant solution was to get some 1/4" square aluminium bar, make holes for 4 M3 nuts and bolts and tighten these to become studs - these are in the horizontal pieces as shown in the pic. These were then epoxy glued to the front panel. Two more bars then take the screen, with spacers so the screen isn't pulled back too much when tightening.
Anyway, elegant or not you can't see it from the front! Still to go on yet are the three push buttons and encoder / tuning wheel for the Langstone transceiver part of the kit. As for the rest, well, one thing at a time! But anyway it works... as shown by yet another successful 6" transmission to the Winterhill box sat on top!
