Radio, railways, stuff...

M0RVB

Heavy metal

The first new (to me) toy of 2026 is a Yaesu G5400B Az/El rotator and controller. This is another thing I have been looking for and this came at a reasonable price. Not yet tested as it needs cables which are made to measure... I've no idea even where to mount it! I can see it ending up on a short mast somewhere up the garden with a couple of Yagi antennas on for 2m and 70cm for satellite work. EME has always been a dream and this has potential and for me EME is more something I want to do but not do all the time. Plus it's hard! So, above is is the two parts of the rotator itself, azimuth on the left and elevation on the right. And the controller is shown below. The unit is 240V powered and once I get some cable I will test it.

Continue reading...
M0RVB

SAQ 24/Dec/2025

Today saw the Christmas 2025 broadcast from SAQ. I set up three receivers to see if any could pick the signal up. These were as follows: YouLoop 1 (loft), Airspy HF+ Discovery, Mac SDR++ YouLoop 2 (loft), Heros VLF converter, SDRPLay RSP2, Linux SDRconnect PA0RDT miniwhip (loft) plus associated preamp, Behringer UMC204HD, Linux VLF-RX tools During the event the VLF-RX code refused to start because, I think anyway ALSA mixer had claimed all the interfaces - the error was that the interface was busy. I was running YouTube on that PC for the live stream. There was no copy, not even a trace of the signal via the RSP2, but the Airspy setup worked fine. Signal strength was well down on last time but still readable visually and audibly although the report I submitted was QSA 2 and QRK 3. The screenshot above shows the reception plus the difference between the LNA being off (lower half) and on. The YouTube video of the event can be found at https://www.youtube.com/watch?v=uSGQ0zR188Q

Continue reading...