Radio, railways, stuff...

M0RVB

Potential activities

I suddenly developed an interest in POTA and SOTA. Not sure why, I never seem to go anywhere other than the railway once a week, or shopping. But there you are. So far I have been active as a hunter and although I have only one confirmed QSO it's still more than zero. The QSO format seems to suit me too. I do prefer digital modes due to having naff hearing but this should get me onto the voice modes.

Continue reading...
M0RVB

Testcards

I've been meaning to set up something to generate a testcard via composite video for a while and, as is typical of me the ideal solution was sitting there in a BATC magazine on my bookshelf. CQ-TV No 270 has the details of one such setup using a Raspberry Pi Zero. I don't have one of those and Pi systems are hard to come by these days but surprisingly I had a 3B not doing anything. Software downloaded, 4-way jack to RCA plugged in and connected to a TV and, nothing. Well, a buzz. Checked the cable, all ok. Checked what the Pi wants... ...why does the Pi have to have the connections different from what appears to be a standard hi-fi 4-way to RCA lead? Or, rather, why does the hi-fi 4-way lead I have have to have different connections? Grumble. Ok. I wanted to test this seeing I had it all sitting in one of the bedrooms attached to a TV. Stripping down a 4-way jack lead that I never needed and which was far too short to be of use I made a lead. It would last probably half a second in normal use but worked sufficiently well to prove the setup. It is of course a waste of a 'whole' 3B, but until I get a Zero this at least lets me push a testcard out when I need one. The alternative has been to use the rather clunky Sandisk device that can present an SD card or other media to an a/v output, as used in my first 5.6GHz setup https://m0rvb.uk/index.php/2021/05/22/5-6ghz-experiments/ - this way is a whole lot neater!

Continue reading...
M0RVB

Microsoft time

You know the thing... installing stuff on Windows where it counts down, and sometimes up again, then gets to 100% and seems to wait for ages. Our washing machine seems to run on Microsoft time too. Well, so too it seems does our old MacBook. This is a 2015 or so 13" MacBook Pro and is no longer used so sits on a shelf. I had it set up as me for testing but wanted to clean it all out so it can be sold. That's where things went a tad wrong. For some reason it took ages to even log in - very unusual as these generally boot in seconds. Then, after the reset it would not boot at all. Long story cut... I set it going doing a restore over the Internet. It began saying it would take 2 hours. Ok. This changed to 12 hours and seemed to come down ok, 11, then 10 each taking about an hour. Then it got down to 9 hours and dropped to 12 minutes! After an hour at 12 minutes left it went to 21 minutes and showed the Apple logo. After another hour it apparently had less than a minute to go. After 2 hours of that I gave up and rebooted it. It went straight back to 29 minutes, then 1 and sat there again. Hmmm. So I downloaded MacOS onto a USB stick and booted the Mac that way. This fired up and said 4 hours (from an attached USB??) but dropped to a few minutes. I left it running but those few minutes became an hour before it finally finished. It is not a happy Mac...

Continue reading...