Radio, railways, stuff...

M0RVB

RFI

Oh so now I'm giving myself RFI. I pinched a pair of powered speakers from one of the domestic PCs yesterday and wired them to the mixer. One speaker is powered from a USB adapter and it is then wired to the mixer via a 3.5mm stereo jack and to the other speaker. No idea if the wires are screened. There is an amp in the powered unit. The YT-1200 upsets the speakers when it is operating, most so on 20m (which is the closest match for the loft antenna). But only the non-powered speaker is affected. A truckload of ferrite on the cable between the speakers has quietened it down for normal operation but it is still upset when tuning. The wire is currently wrapped multiple times through two decent ferrites, so much so that the speakers are now next to each other! Hmmm. Looks like I need to take these things apart to see what the cables are actually like.

Continue reading...
M0RVB

QSLs

I received my first QSL cards via the bureau today, a pleasant surprise. 6 cards with dates spread across most of 2017 - a lot of the time I use eQSL so I didn't expect many. Some request cards in return - which I will of course but I'm afraid the basic design of mine is no match for those received!

Continue reading...
M0RVB

Sorting the audio out

I've whinged before that my ears are naff. I often use headphones to help but now with so many radios it's a pain, especially when the relevant socket is on the rear of the rig. Ages back I set up a mini-recording studio to help the kids with their music lessons and practice. Guess what, I have a mixer as part of this and yet left it sat on a shelf forgotten! No prizes for guessing where it is now. So, I can now mix in all the radios and the PC / SDR and output to headphones or speakers or both. It has two channels so I can play one radio through one speaker and another through the other which is useful. The same goes with output to the headphones but this is less useful because my hearing is so far down on one side that I play everything through my 'better' ear. But it gives a lot of flexibility. One thing I am toying with getting is a decent audio processor. I had a Datong unit which I sold on but that was before the current DSP offerings. Again, the mixer will be useful because it has an FX channel, meaning I could send audio from one rig out through a DSP processor and back into the mixer all without having to fiddle with plugs. Now if I could just tidy up all the wires...

Continue reading...