FT818

I now have an FT818 as well as the FT817 so I have been rearranging stuff yet again. The FT817 was destined to be used portable but will now be a shack fixture - it has 2m and 70cm which is lacking since I sold the two transverters. The FT818 will be paired with the LDG Z817 autotunes and I will put together some wire and stuff to go portable. Both rigs came with the internal battery packs and together there is now a car charger, two mains chargers (one converted to power pole connectors) and a couple of leads that are of no use now with the power pole adapters being fitted to both rigs. There are lots of ideas floating about on using better battery packs or external batteries which I will have a think about. Given my 'portable' use initially is more likely to be in holiday accommodation there will be mains available.

So, having decided the FT817 is to become a fitment I have connected its Signalink to the Linux box along with the one already attached to the FT450D. Wsjt-x has this though out nicely through the ability to have multiple configurations. I'd never want to run two copies of wsjt-x for the two rigs at the same time so this works well. The documentation explains it but basically it's a matter of selecting Configuration and cloning the current one, choosing names for each (I just used the rig names), and then selecting the second Signalink and rig details in the cloned configuration. All seems to work fine, the only thing that initially caught me out is that when one selects a configuration wsjt-x closes and reopens - I thought it had crashed.

I only run the radio at 2.5W but I do have a 2m linear to play with at some stage. It always surprises me how far 2.5W and the loft mounted big wheel will get on 2m.

This means my current configuration - digital wise anyway - is the FT817 and FT450D are connected to the Linux box via their Signalinks and CAT cables but the FT450D Signalink and CAT control can also be switched across to the Windows PC where I have Vara and VarAC installed. And a mess of wire...

Update: clearly I have overcomplicated things. Last night when changing configs wsjt-x could not sort itself out. Rebooting the PC sorted that. But this morning the FT817 was sat flashing its screen and although the FT450D was fine and I could make FT8 contacts all was not well. Unplugging everything from the FT817 and power cycling it cured the flash but then the FT450D had dropped off CAT control as well. For now I've set everything back as before, with the FT817 on the Mac.