Clock
I finally have a UTC clock (it does other stuff too). This is a QRP Labs Clock built from a kit of parts plus a GPS receiver, also QRP Labs. Very simple to build. It runs from 5V (pity it's not 12V but there you are) but I recently acquired a 5V linear PSU to run the three little LoRa boards rather than the 12V/USB charger I currently use. The kit is not yet finished - I need to attach the power switch and connect those two push buttons - but it's a neat little thing in a nice case.
I was looking for a GPS locked UTC clock and recently built a kit which is also a 10MHz source and has a 10MHz OCXO to make a really useful device. That also has a clock display as well as other dispel modes such as satellites, locator and such but the clock is always about 1 second slow. Reading through the documentation from QRP Labs it transpires that this is because the 1PPS signal and the NMEA data can overlap, so the data stream from the GPS that shows date and time is not aligned to the PPS pulse which is the actual timestamp. Thus if you feed that data to a clock display it runs slow.
(being lazy and saying GPS everywhere, I should really use GNSS!)